Physical Model Study Of Standing Wave Impact Loads On Gates And Decks Of The Existing Discharge Sluices In The Afsluitdijk The Netherlands

Abstract

To anticipate the rising sea level and to meet the increased flood safety standards the Afsluitdijk in the northwest of The Netherlands is currently being reconstructed. The Afsluitdijk is the dam, with a length of 30 km, that closes the IJsselmeer basin, the former Zuiderzee. Outside the dam lie the Waddenzee and the North Sea. The reconstruction of the dam includes the reinforcement of  the dam and the raising of the crest level, the renovation of the existing discharge sluices and the building of new pumping stations, discharge sluices and flood gates. Higher design waves and water levels, including the effects of sea level rise, present determining loads for drawing up the strength and stability of these hydraulic structures. One of these loads is the wave impact load on the gates, supporting beams and bridge decks of the discharge sluices. At first, these loads have been calculated using a design approach which has been based on analytical models, only partially validated (Almeida and Hofland, 2020). It showed that these loads due to vertical wave impacts can be higher than the strength of the gates and the existing bridge decks. Therefore, load reduction measures are required. To better predict the wave impact loads, which strongly depend on the configuration of the gates and decks, a physical model study in a wave flume has been carried out at Deltares (Capel and van der Werf, 2023). This abstract is about the results of this model study, focusing on the wave impacts on the existing discharge sluices near Kornwerderzand, because at this location these loads are the highest.